Step 2 for the mast

This is step 2 for the mast upgrade

Now level out the u bolts with your jin pole bar as shown, dont use a level because the boat is not level measure with a tape on each end within 1/8 inch is fine

You have determined the height of the U bolts and the one on the mast does clear the mast base plate right?

I hope so

Now set up your U bolt for the mast .

You must be exact on this or the mast will not step into position when you raise it and most likely something will break. Measure from the from the front of the mast to the front of your hindge tube ,this is the length the u bolt must extend from the mast .

The pics show my adjustment method just follow those steps and you wont have a problem.